CAT laboratory equipment: overhead stirrers, magnetic stirrers, homogenisers and dosing pumps
CAT laboratory equipment: overhead stirrers, magnetic stirrers, homogenisers and dosing pumps
Overhead stirrers, magnetic stirrers, homogenisers, hotplates, roller mixers, shakers and dosing pumps from CAT: the full range from one German manufacturer, with technical data per model.
CAT (M. Zipperer GmbH) builds equipment in Germany for stirring, homogenising, heating, mixing and dosing in the laboratory. The overhead stirrers range from the compact R 16 for small volumes to the R 100 for viscous media and up to 200 litres; the homogenisers from the X 120 to the X 1740 for 20 litres.
On this page you will find all models with speed, temperature or volume, a link to the article page and the accessories: stirring rods, dispersing elements, stands, clamps, temperature probes and cables.
Read moreRead less
The magnetic stirrers come with and without heating, from the compact ECM series to the M 30.30 for 100 litres. The hotplates, from 13.5 × 13.5 cm to 30 × 45 cm, reach up to 400 °C. The microprocessor-controlled MCS models have an LCD display.
The DP 200 precision dosing pumps come with pump heads for dispensing volumes from 1 µl to 500 ml. CAT also makes a cell counter, sampling systems and systems for leaching tests.
At a glance
- Overhead stirrers from 4 to 600 Ncm, for 5 to 200 litres and viscosities up to 100,000 mPa·s
- Homogenisers from 140 W to 1800 W with dispersing elements and flow-through chambers
- Magnetic stirrers without heating (up to 100 litres) and with heating up to 500 °C
- Hotplates, a sand bath and a slide drying bench
- Roller mixers, orbital shakers, wrist-action shaker, rocking shaker and vortex mixer
- DP 200 precision dosing pumps, multichannel pump, OEM module and digital burettes
- DIFF 15 cell counter, CaRo and DSR sampling systems and systems for leaching tests
- More than 180 articles, each with a link to its article page
Overhead stirrers
From the small R 16 for simple tasks to the R 100 for heavy-duty work with viscous media.

| Model | Speed (rpm) | Torque (Ncm) | Stirring quantity, water (l) | Viscosity max. (mPa·s) | Order number |
|---|---|---|---|---|---|
| R 16 | 50 – 1,000 | 4 | 5 | 100 | ES602130050 |
| R 18 | 100 – 2,000 | 18 | 20 | 8,000 | ES602140000 |
| R 20D-PC | 50 – 2,000 | 20 | 35 | 10,000 | ES602140055 |
| R 50 | 50 – 1,600 | 50 | 60 | 30,000 | ES602150000 |
| R 60D-PC | 30 – 800 | 60 | 100 | 50,000 | ES602140065 |
| R 100C | 40 – 2,000 | 150 | 200 | 60,000 | ES602180000 |
| R 100CL | 30 – 1,100 | 250 | 200 | 70,000 | ES603150000 |
| R 100CT | 10 – 500 | 600 | 200 | 100,000 | ES603140000 |
Homogenisers
High-speed drives for homogenising and dispersing, with the matching dispersing elements and flow-through chambers.

| Model | Speed (rpm) | Power (W) | Volume water max. (l) | Flow rate (l/min) | Order number |
|---|---|---|---|---|---|
| X 120 | 10,000 – 33,000 | 140 | 2 | – | ES604040000 |
| X 1000 Unidrive | 4,000 – 33,000 | 1,050 | 5 | – | ES604020050 |
| X 1000D Unidrive | 4,000 – 33,000 | 1,050 | 5 | – | ES604060050 |
| X 1740 | 2,500 – 23,000 | 1,800 | 20 | 80 | ES604080000 |
Dispersing elements and flow-through chambers
Each element comes with four rotors: F for fine, M for knife, N for low viscosity and V for viscous media. The article number contains the rotor letter.
| Element | Rotor F (fine) | Rotor M (knife) | Rotor N (low viscosity) | Rotor V (viscous) |
|---|---|---|---|---|
| G 20 | ES60423000F | ES60423000M | ES60423000N | ES60423000V |
| G 30 | ES60428000F | ES60428000M | ES60428000N | ES60428000V |
| G 40 | ES60415000F | ES60415000M | ES60415000N | ES60415000V |
| T 6 | ES60420000F | ES60420000M | ES60420000N | ES60420000V |
| T 10 | ES60421000F | ES60421000M | ES60421000N | ES60421000V |
| T 17 | ES60426000F | ES60426000M | ES60426000N | ES60426000V |
| T 20 | ES60422000F | – | ES60422000N | ES60422000V |
Flow-through chambers: DK 30 (ES60428000) and DK 40 with rotor F, N or V.
Magnetic stirrers without heating
From the compact ECM for 1 litre to the M 30.30 for 100 litres.

| Model | Speed (rpm) | Plate (mm) | Stirring quantity, water (l) | Order number |
|---|---|---|---|---|
| ECM 2 | 10 – 20 | 100 × 100 | 1 | ES602520000 |
| ECM 5 | 50 – 1,200 | 100 × 100 | 1 | ES602550000 |
| M 5 | 60 – 1,600 | 140 × 155 | 10 | ES602650000 |
| M 20.20 | 100 – 1,100 | 200 × 245 | 50 | ES602530010 |
| M 30.30 | 100 – 1,100 | 300 × 310 | 100 | ES602540010 |
Magnetic stirrers with heating
The heated models with a plate of stainless steel, anodised aluminium or Ceran® glass ceramic; the KM models are spherical heating mantles for round-bottom flasks.
| Model | Speed (rpm) | Temperature (°C) | Heating plate | Order number |
|---|---|---|---|---|
| ECM 6 | 10 – 1,200 | RT+5 – 250 | anodised aluminium, 90 × 90 mm | ES602560000 |
| M 6 | 80 – 1,600 | RT+5 – 400 | Ceran® glass ceramic, 135 × 135 mm | ES602660000 |
| M 6.1 | 80 – 1,600 | RT+5 – 330 | stainless steel, Ø 130 mm | ES602680000 |
| M 6.2 | 80 – 1,600 | RT+5 – 330 | anodised aluminium, Ø 140 mm | ES602690000 |
| M 21 | 60 – 1,600 | RT+5 – 350 | stainless steel, Ø 130 mm | ES603610000 |
| M 22 | 60 – 1,600 | RT+5 – 380 | anodised aluminium, Ø 140 mm | ES603620000 |
| M 23 | 60 – 1,600 | RT+5 – 500 | Ceran® glass ceramic, 135 × 135 mm | ES603630000 |
| M 26G2 | 60 – 1,600 | RT+5 – 360 | anodised aluminium, Ø 140 mm | ES602790000 |
| MCS 77 | 60 – 1,600 | RT+5 – 330 | anodised aluminium, Ø 140 mm | ES602760050 |
| MCS 78 | 60 – 1,600 | RT+5 – 440 | Ceran® glass ceramic, Ø 130 mm | ES602770050 |
| KM 16.4D | 60 – 1,100 | RT+5 – 450 | anodised aluminium, SR 90 | ES603570000 |
| KM 16.7D | 60 – 1,100 | RT+5 – 450 | anodised aluminium, SR 120 | ES603580000 |
Hotplates, sand bath and drying bench
Hotplates without stirring, with a plate of anodised aluminium, stainless steel or Ceran®.

| Model | Temperature (°C) | Power (W) | Plate | Order number |
|---|---|---|---|---|
| Hotplate H 3 | 40 – 400 | 600 | Ceran® glass ceramic, 135 × 135 mm | ES602230000 |
| Hotplate H 3.1 | 40 – 330 | 500 | stainless steel, Ø 130 mm | ES602250000 |
| Sand bath H 4 | 40 – 330 | 600 | stainless steel, 140 × 140 × 55 mm | ES602240000 |
| Hotplate H 30/30 | 40 – 350 | 2,000 | anodised aluminium, 300 × 300 mm | ES602260010 |
| Hotplate H 30/30C | 40 – 400 | 2,000 | Ceran® glass ceramic, 300 × 300 mm | ES602260030 |
| Hotplate H 30/30D | 40 – 380 | 2,000 | anodised aluminium, 300 × 300 mm | ES602260050 |
| Hotplate H 30/45 | 40 – 350 | 2,000 | anodised aluminium, 450 × 300 mm | ES602260020 |
| Hotplate H 30/45C | 40 – 400 | 2,000 | Ceran® glass ceramic, 450 × 300 mm | ES602260040 |
| Drying bench H 15/30 | 30 – 115 | 150 | anodised aluminium, 182 × 360 mm | ES602290000 |
Roller mixers, shakers and vortex mixer
For mixing tubes, bottles and flasks.

| Device | Type | Speed | Feature | Order number |
|---|---|---|---|---|
| Roller mixer RM 5 | rollers | 4 – 70 rpm | 5 rollers of 330 mm, up to 5 kg | ES602070120 |
| Roller mixer RM 5F | rollers | 4 – 70 rpm | 5 rollers | ES602070020 |
| Roller mixer RM 5K | rollers | 4 – 70 rpm | 5 shorter rollers of 216 mm | ES602070140 |
| Roller mixer RM 10 | rollers | 4 – 70 rpm | 10 synchronised rollers, up to 5 kg | ES602070150 |
| Orbital shaker S 20 | orbital | 100 – 1,100 rpm | orbit 3 mm, up to 2 kg | ES602830000 |
| Orbital shaker S 26 | orbital | 60 – 1,100 rpm | orbit 3 mm, up to 2 kg, for culture flasks and Erlenmeyer flasks | ES603860000 |
| Shaker S 50 | wrist-action | 50 – 800 rpm | two side arms with 8 three-point clamps | ES602850010 |
| Rocking shaker ST 6 | rocking | 10 – 100 rpm | platform 410 × 340 mm with non-slip mat, up to 7 kg | ES602810020 |
| Vortex mixer VM 2 | vortex | 100 – 2,800 rpm | test tubes up to Ø 30 mm (Falcon 50 ml) | ES602040000 |
DP 200 precision dosing pumps
Micro dosing pumps with digital flow control, with pump heads for volumes from 1 µl to 500 ml.

| Pump head | Dispensing volume | Flow rate (ml/min) | Order number |
|---|---|---|---|
| DP 200, 20T | 1 µl – 50 ml | 0.02 – 4 | ES617600000 |
| DP 200, 20TPS | 1 µl – 50 ml | 0.02 – 4 | ES617610000 |
| DP 200, 20V | 1 µl – 50 ml | 0.02 – 4 | ES617620000 |
| DP 200, 20VPS | 1 µl – 50 ml | 0.02 – 4 | ES617630000 |
| DP 200, 200T | 10 µl – 500 ml | 0.2 – 40 | ES617640000 |
| DP 200, 200TPS | 10 µl – 500 ml | 0.2 – 40 | ES617650000 |
| DP 200, 200V | 10 µl – 500 ml | 0.2 – 40 | ES617660000 |
| DP 200, 200VPS | 10 µl – 500 ml | 0.2 – 40 | ES617670000 |
| DP 200, 300TPS | see article page | see article page | ES617680000 |
| DP 200, 300VPS | see article page | see article page | ES617690000 |
Pumps, burettes, cell counter and analysis systems
Besides the DP 200, CAT makes multichannel pumps and OEM pump modules, a cell counter and systems for sampling and leaching tests.

| System | Application | Order number |
|---|---|---|
| Multichannel dosing pump MDP | 1 to 14 pump modules in one device | ESMDP |
| OEM pump module DP 200-OEM | for developing and building your own devices | ESDP200OEM |
| Contiburette µ 1D | digital bottle-top burette, 1 mL | ES627300000 |
| Contiburette µ 10H | digital bottle-top burette, 10 mL | ES627230000 |
| Contiburette µ 10D | digital bottle-top burette, 10 mL | ES627320000 |
| Contiburette µ 20H | digital bottle-top burette, 20 mL | ES627240000 |
| Contiburette µ 20D | digital bottle-top burette, 20 mL | ES627340000 |
| Cell counter DIFF 15 | compact, for manual differential counts (15 keys, 4 programs) | ES602430015 |
| Sampling system CaRo | slim sampling system for daily laboratory work | ESCARO |
| Sampling system DSR | offline sampling system for tablet dissolution baths | ESDSR |
| Leaching test column TC 50 | inert test column with a steel tube | ES617060000 |
| Leaching test column TC 100 | inert test column with a steel tube | ES617080000 |
| Modular automatic column test system | fully automatic system for leaching or percolation tests | ESCOLUMNTEST |
Stirring rods with blade
Stainless steel (inox) stirring rods for the overhead stirrers.
| Type | Version | Length (mm) | Rod Ø (mm) | Blade Ø (mm) | Order number |
|---|---|---|---|---|---|
| Propeller stirrer | 3 blades | 300 | 6 | 50 | ES8B00910000 |
| Propeller stirrer | 3 blades | 300 | 8 | 50 | ES8B00910300 |
| Propeller stirrer | 3 blades | 400 | 8 | 50 | ES8B00910400 |
| Propeller stirrer | 3 blades | 500 | 8 | 50 | ES8B00910500 |
| Propeller stirrer | 3 blades | 400 | 8 | 70 | ES8B00911000 |
| Propeller stirrer | 3 blades | 500 | 10 | 100 | ES8B00911400 |
| Propeller stirrer | 4 blades | 300 | 6 | 50 | ES8B00900000 |
| Propeller stirrer | 4 blades | 400 | 8 | 50 | ES8B00900400 |
| Propeller stirrer | 4 blades | 400 | 8 | 100 | ES8B00901000 |
| Paddle stirrer | – | 300 | 6 | 50 | ES8B00970000 |
| Paddle stirrer | – | 300 | 8 | 50 | ES8B00970300 |
| Paddle stirrer | – | 400 | 8 | 50 | ES8B00970400 |
| Paddle stirrer | – | 500 | 8 | 50 | ES8B00970500 |
| Centrifugal stirrer | – | 400 | 8 | 90 / 15 | ES8B00921000 |
| Perforated stirring blade | 3 holes | 400 | 8 | 70 | ES8B00940400 |
| Perforated stirring blade | 3 holes | 500 | 10 | 70 | ES8B00940800 |
| Perforated stirring blade | 6 holes | 400 | 8 | 70 | ES8B00950400 |
| Perforated stirring blade | 6 holes | 500 | 10 | 70 | ES8B00950800 |
Stirring shaft, blades and dissolver discs
Inox stirring shaft Ø 8 × 350 mm with stirring blades or dissolver discs, and a protective cover.
| Article | Order number |
|---|---|
| Stirring shaft Ø 8 × 350 mm, inox | ES606180000 |
| Stirring blade with shaft Ø 8 × 350 mm, inox | ES606180050 |
| Stirring blade, length 90 mm, inox | ES606190000 |
| Stirring blade, length 150 mm, inox | ES606190010 |
| Dissolver disc Ø 100 mm, without shaft | ES606170000 |
| Dissolver disc Ø 100 mm, with shaft | ES606170050 |
| Dissolver disc Ø 36 mm, without shaft | ES606170010 |
| Dissolver disc Ø 36 mm, with shaft | ES606170060 |
| Protective cover for stirring shaft | ES606180060 |
Stands, clamps and temperature probes
For setting up the devices and measuring the temperature.
| Article | Order number |
|---|---|
| Stand with plate and rod | ES604910010 |
| Stand rod Ø 8 × 350 mm, M 6 | ES606630000 |
| U-stand for R 100 and X 1740, vessels up to Ø 500 mm | ES604940001 |
| Double boss head | ES604920000 |
| Double boss head inox, for arm Ø 12 mm | ES604920050 |
| Double boss head with 2 clamping levers | ES604920020 |
| Special clamp R 100, Ø 15 to 35 mm | ES604950000 |
| Jumbo clamp for the protective cover of the stirring shaft | ES8B00565000 |
| Thermometer clamp 0 to 20 mm | ES8B00562400 |
| Stand rod holder for M 6 | ES606690000 |
| Temperature probe PT 100, Ø 4 mm, cable 90 cm | ES602780000 |
| Temperature probe PT 100, Ø 3 mm, cable 138 cm | ES602780030 |
| Temperature probe PT 100, Ø 3 mm, cable 90 cm | ES602780040 |
| Temperature probe PT 100 duplex for M 26G2 | ES606730000 |
Rotor wrenches for dispersing elements
Wrenches for fitting the rotors of the dispersing elements.
| Article | Order number |
|---|---|
| Universal rotor wrench T 6 to T/G 20 | ES604700000 |
| Rotor wrench T 10 | ES604720000 |
| Rotor wrench T 30 / G 30 | ES604760000 |
| Rotor wrench T 40 / G 40 | ES604770000 |
| Socket wrench for dispersing elements | ES604710000 |
Attachments and clamps for the shakers
Attachments for Erlenmeyer flasks, bottles and test tubes, and clamps for the shaker arm.
| Article | Order number |
|---|---|
| Attachment S for shaker, platform 200 × 400 mm | ES606480000 |
| Attachment E for shaker, one vessel up to 100 ml | ES606830000 |
| Attachment V for shaker, 4 flasks of 500 ml | ES606850000 |
| Attachment U for shaker, universal | ES606860000 |
| Attachment R for shaker, 36 test tubes | ES606870000 |
| Attachment 6E for shaker, 6 Erlenmeyer flasks of 250 ml | ES606890010 |
| Attachment 4E for shaker, 4 Erlenmeyer flasks of 500 ml | ES606890020 |
| Attachment 2E for shaker, 2 Erlenmeyer flasks of 1000 ml | ES606890030 |
| Shaker arm for 6 three-finger clamps | ES102850057 |
| Three-finger clamp for shaker arm | ES202850017 |
| Eccentric rollers for roller mixers | ES402070010 |
| Concentric rollers for roller mixers | ES402070020 |
Tubing, fittings, bottle adapters and cables
Accessories for the pumps, the Contiburette and the interface of the devices.
| Article | Order number |
|---|---|
| PTFE tubing, outer Ø 1.6 / inner Ø 1.0 mm, 1 m | ES107580002 |
| PTFE tubing, outer Ø 2.4 / inner Ø 1.6 mm, 1 m | ES107210020 |
| PTFE tubing, outer Ø 3.2 / inner Ø 1.6 mm, 1 m | ES107580001 |
| PTFE tubing, outer Ø 5.0 / inner Ø 4.0 mm, 1 m | ES102910003 |
| PTFE tubing, outer Ø 6.0 / inner Ø 4.0 mm, 1 m | ES102910023 |
| FEP tubing, outer Ø 3.0 / inner Ø 2.0 mm, 1 m | ES102910019 |
| Fitting for tubing with outer Ø 1.56 mm | ES107210001 |
| Fitting for tubing with outer Ø 3.0 / 3.2 mm | ES107210003 |
| Pump head connection M8 for HPLH 300 | ES107210005 |
| Pump head connection M10 for HPLH 1000 | ES107380002 |
| Bottle adapter A32-25 for the Contiburette | ES607030000 |
| Bottle adapter A32-28 for the Contiburette | ES607040000 |
| Bottle adapter A32-38 for the Contiburette | ES607050000 |
| Bottle adapter A32-40 for the Contiburette | ES607060000 |
| Bottle adapter A32-45 for the Contiburette | ES607070000 |
| Adapter RS485-RS232 (serial interface) | ES617030000 |
| Adapter RS485-RS232 for MCS 77/78 | ES617030050 |
| RS232 cable, 2 m | ES302750051 |
| USB-RS232 adapter | ES302440001 |
| PC connection cable, 1.8 m | ES502760005 |
Questions about these products or a quotation?
Get in touch for advice, a quotation or the delivery time. We are happy to help.
Contact us+32 (0) 14 560 221 · info (at) glasatelier-saillart.be