IKA magnetic stirrers RCT basic and RET basic: the new generation
IKA magnetic stirrers RCT basic and RET basic: the new generation
The bestseller among magnetic stirrers in a new design: compact, safer and connected.
IKA has completely renewed its best-known magnetic stirrers. The RCT basic and RET basic have a heating plate of just 135 mm and measure 160 × 100 × 200 mm: handy in the fume hood and for placing several magnetic stirrers side by side. They are built on the RoboMag line, according to IKA the first fully automated production line for laboratory devices, and every unit is tested automatically.
The RCT basic is the new standard for everyday laboratory work. The RET basic is meant for those moving towards automation and Lab 4.0: with Ethernet, Wi-Fi and a link to the IKA Lab Monitor (cloud) and the IKA Lab Assistant (app).
Read moreRead less
Wireless coupling: with the USB dongle (accessory; built into the RET basic) the magnetic stirrer talks directly to IKA overhead stirrers. If the speed of the overhead stirrer drops below a set limit, the heating switches off. This lets you heat viscous samples that cannot be stirred magnetically safely and unattended.
Five operating modes (A to D and R) determine what happens after a power interruption and whether settings may be changed or must be confirmed. On the RET basic anodized (black anodised aluminium plate, 800 W) the heat output can be set in four steps for slow, controlled heating, and the FAST, Precise and BLOCK modes adapt the control to sensitive reactions or synthesis blocks.
At a glance
- Heating plate of 135 mm: according to IKA the smallest magnetic stirrer on the market, stirring up to 20 litres of water
- Protection class IP 54: sealed housing, glass display cover and silicone caps on the connections
- Die-cast aluminium housing: fireproof, sturdy and stable
- Maintenance-free brushless EC motor with soft start, so the stirring bar does not decouple
- AlNiCo magnet right below the heating plate for strong coupling with the stirring bar
- Adjustable safety circuit from 50 to 360 °C, HOT warning and key lock against unwanted changes
- External temperature sensor can be connected (PT1000, ETS-D5, ETS-D7 or wireless), up to two sensors at once
- Fits standard 200 × 200 mm lab jacks (lifting platforms), with two mounting points for stand rods
- Programmable timer with acoustic signal and a clear LED display
Which model suits you?
Click the order number for the article page.
| Model | Feature | Order number |
|---|---|---|
| RCT basic | Digital magnetic stirrer with heating up to 310 °C and 1500 rpm, for everyday work | 0025008259 |
| RET basic | Like the RCT basic, up to 340 °C and 1700 rpm, with Ethernet, Wi-Fi and built-in wireless coupling | 0025008265 |
| RET basic anodized | Like the RET basic, with a black anodised aluminium plate that is scratch-resistant and chemically resistant | 0020133787 |
RCT basic and RET basic compared
Data from IKA. The maximum temperature is room temperature plus the self-heating of the device.
| Property | RCT basic | RET basic |
|---|---|---|
| Max. temperature | 310 °C | 340 °C |
| Speed | 50 – 1500 rpm | 50 – 1700 rpm |
| Max. stirring volume (water) | 20 l | 20 l |
| Heating plate | Ø 135 mm | Ø 135 mm |
| Adjustable safety circuit | 50 – 360 °C | 50 – 360 °C |
| Dimensions (W × H × D) | 160 × 100 × 200 mm | 160 × 100 × 200 mm |
| Protection class (DIN EN 60529) | IP 54 | IP 54 |
| External temperature sensor | PT1000, ETS-D5, ETS-D7, wireless PT | PT1000, ETS-D5, ETS-D7, wireless PT |
| Ethernet and Wi-Fi | No | Yes |
| Wireless sensors | With dongle | Yes |
| IKA Lab Assistant (app) | With dongle | Yes |
| IKA Lab Monitor (cloud) | No | Yes |
| Device-to-device communication | Yes | Yes |
Wireless coupling with an IKA overhead stirrer
RCT basic or RET basic with an IKA overhead stirrer: the heating switches off as soon as the overhead stirrer runs too slowly.
For viscous samples that cannot be stirred magnetically: the magnetic stirrer only heats, the overhead stirrer stirs, and the whole set-up may run unattended. On the RCT basic you need the USB dongle for this (accessory); ask us for the delivery time.
C-MAG: the classic range for larger volumes
Magnetic stirrers with ceramic or glass-ceramic plate, with and without heating. Click the order number for the article page.
| Model | Stirring volume | With heating | Order number |
|---|---|---|---|
| C-MAG HS 4 | 5 l | Yes | 0003581000 |
| C-MAG HS 4 digital | 5 l | Yes | 0004240200 |
| C-MAG HS 7 | 10 l | Yes | 0003581200 |
| C-MAG HS 7 digital | 10 l | Yes | 0003487000 |
| C-MAG HS 10 | 15 l | Yes | 0003581400 |
| C-MAG HS 10 digital | 15 l | Yes | 0004240400 |
| C-MAG HS 7 control | 20 l | Yes | 0020002694 |
| C-MAG MS 4 | 5 l | No | 0003582200 |
| C-MAG MS 7 | 10 l | No | 0003582400 |
| C-MAG MS 10 | 15 l | No | 0003582600 |
Accessories
Temperature sensors and protective cover for the IKA magnetic stirrers.
| Article | Description | Order number |
|---|---|---|
| PT 1000.60 | Temperature sensor, stainless steel | 0003516800 |
| PT 1000.70 | Temperature sensor, glass-coated | 0003736000 |
| PT 1000.80 | Temperature sensor, stainless steel | 0004443000 |
| PT 1000.90 | Temperature sensor, coated | 0004480600 |
| H 100 | Protective cover | 0003661000 |
Questions about these products or a quotation?
Get in touch for advice, a quotation or the delivery time. We are happy to help.
Contact us+32 (0) 14 560 221 · info (at) glasatelier-saillart.be