Peristaltic pump iPump2S-M, drive IP54 variable up to 200 RPM

The iPump2S-M peristaltic pump was built as a pump for rough use with changing pump rates. The drive can be combined with different pump heads for up to 10 channels. The motor speed can be adjusted in the range from 0.1 up to 200 RPM. Depending on the pump head and tubing, flow rates of 0.0001-825 ml/min are possible with this pump. In addition to the pump speed, the running time of the pump can also be adjusted. The setpoints can be adjusted via a membrane keypad, via the RS485 interface or via the analogue interface. The hose line can be filled quickly via a prime button.

The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The metal housing is easy to clean and offers IP 54 protection against penetrating splash water and dust. The small dimensions allow space-saving installation.

Flow rate: 0.0001- 825 ml/min
Speed: 0.1-200 RPM
Accuracy: 1 UPM
Pump direction: Forward
Time control: 0,1s-99 h
Display: 3-digit speed display
Interface: RS-485
External signals: Start/stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Size: 140×96×96 mm (d*w*h)

Scope of delivery:
Pump drive without head