Micro peristaltic pump iPump1Q, up to 164 ml/min, time control
Order-No.: 106723112
424,12 € for 1 piece plus VAT (21%) plus shipping costs
- Assortment: Landgraf HLL
- Article-No: 106723112
- Category: Peristaltic pumps
Show all Peristaltic pumps from Landgraf HLL - Category No.: 90405103
- Synonym(s): hose pumps, tubing pumps
- Validity: 31.03.2027
- Last Update: 31.03.2026
- Similar articles: Show (2)
The picture may be different from the article and can include supply, which is not in the standard scope.
The iPump1Q peristaltic pump is a cost-effective device with a timer control for realising more complex pumping tasks, also with external control. The flow rates and times are preset via buttons and stored even when the unit is switched off. The pump is mounted in an L-frame and can be easily installed in units. Depending on the head and tubing, flow rates of 0.006-164 ml/min can be realised. The housing is easy to clean and provides IP 31 protection for the unit.
Flow rate: 0.006-164 ml/min
Speed: 0.1-100 RPM
Pump direction: Forward
Time control: 0,1s-99 h
Display: 3-digit speed display
Interface: RS-485
External signals: Start/stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Size: 140×96×96 mm (d*w*h)
Scope of delivery:
Pump drive without head
Flow rate: 0.006-164 ml/min
Speed: 0.1-100 RPM
Pump direction: Forward
Time control: 0,1s-99 h
Display: 3-digit speed display
Interface: RS-485
External signals: Start/stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Size: 140×96×96 mm (d*w*h)
Scope of delivery:
Pump drive without head
| Description | value |
|---|---|
| Maximum volume to be transported: | 164 ml/min |
| Maximum rotation speed: | 100 upm |
| Voltage supply: | 230 V AC |
| Type of output signal: | Analog |
| Type of output signal: | RS 485 |
| Description | value |
|---|---|
| WEEE obligation: | Yes |
| WEEE registration number: | DE87387371 |
| WEEE brand according to EAR register: | HLL |
| WEEE type of equipment: | Small equipment for use in other than private households only |
Pump head JZ15A, 1 channel, 2 rollers, up to 490 ml/min, hose 1.6 mm wall The JZ15A pump head...
Pump head JZ15B, 1 channel, 4 rollers, up to 120 ml/min, hose 1.6 mm wall The JZ15B pump head...
Foot switch for iFluid peristaltic pumps The pump can be started and stopped with the switch. The...
Control module RS485 The module connector enables the standard interface to be controlled via an...
Control module 0-10V The module connector enables the standard interface to be controlled via a...
Control module 4-20 mA The module connector enables the standard interface to be controlled via a...
