LaboStar Pro UV 4
Order-No.: W3T324491
4.468,06 € for 1 piece plus VAT (21%) plus shipping costs
- Assortment: Evoqua Water Technologies
- Article-No: W3T324491
- Category: Ultrapure water systems
Show all Ultrapure water systems from Evoqua Water Technologies - Category No.: 90850404
- Package: 1 piece
- Validity: 31.12.2026
- Last Update: 31.12.2025
- Similar articles: Show (6)
The picture may be different from the article and can include supply, which is not in the standard scope.
LaboStar Pro UV 4 - Mobile Ultrapure water system, 1,5 l/min, 7 l Tank, UV
HIGHEST WATER QUALITY
The extremely space-saving LaboStar PRO UV 4 ultrapure water system for the cost-effective production of analytically pure water can be used as a mobile benchtop unit.
The water quality with a conductivity of 0.055 µS/cm, corresponding to 18.2 MΩ-cm, and a TOC content of 1-5 ppb by UV oxidation exceeds the common quality standards.
Deionized water, distilled water or permeate from a reverse osmosis system is required as feed water for the LaboStar PRO UV 4. This is filled manually into the integrated 7 l tank. After refilling the tank, the ultrapure water is available within minutes.
In the LaboStar units, a polisher module with a selection of the purest treatment materials ensures the ultrapure water quality. A conductivity measurement in the recirculation constantly monitors the purity of the product water.
A 0.2 µm sterile filter with bacterial and endotoxin retention capacity is located on the dispenser. The user can produce water with an endotoxin content of < 0.001 EU/ml without investing in an ultrafilter. A 0.2 µm filter without endotoxin retention is also available.
The LaboStar systems are delivered ready to use, including the first set of modules and filters.
Technical specifications
Ultrapure water specifications:
Dispense rate: 1.5 l/min
Conductivity at 25ºC: 0.055 µS/cm
Resistivity at 25ºC: 18.2 MOhm-cm
TOC: 1 - 5 ppb
Bacteria**: < 0,1 CFU/ml
Endotoxins**: < 0.001 EU/ml
Particulates >0.2 µm/ml: < 1
**with charged sterile filter
Feed water specifications:
Pressure: 0 bar
Conductivity: < 20 µS/cm
Colloid index (SDI): < 3
Free Chlorine: < 0.1 mg/l
Total Iron: < 0.1 mg/l
CO2: < 15 mg/l
SiO2: 2 ppm
Temperature: 5 - 30ºC
Mains input: 100-240 V, 50-60 Hz
Power consumption: max. 270 W
Water connection:
1/2" or 3/4" female thread
Power lead with plug (D;GB;USA):
1.5 m / 1.7 m
Dimensions and Weight
Height: 535 mm
Width: 400 mm
Depth: 520 mm
Dispatch weight: 24 kg
HIGHEST WATER QUALITY
The extremely space-saving LaboStar PRO UV 4 ultrapure water system for the cost-effective production of analytically pure water can be used as a mobile benchtop unit.
The water quality with a conductivity of 0.055 µS/cm, corresponding to 18.2 MΩ-cm, and a TOC content of 1-5 ppb by UV oxidation exceeds the common quality standards.
Deionized water, distilled water or permeate from a reverse osmosis system is required as feed water for the LaboStar PRO UV 4. This is filled manually into the integrated 7 l tank. After refilling the tank, the ultrapure water is available within minutes.
In the LaboStar units, a polisher module with a selection of the purest treatment materials ensures the ultrapure water quality. A conductivity measurement in the recirculation constantly monitors the purity of the product water.
A 0.2 µm sterile filter with bacterial and endotoxin retention capacity is located on the dispenser. The user can produce water with an endotoxin content of < 0.001 EU/ml without investing in an ultrafilter. A 0.2 µm filter without endotoxin retention is also available.
The LaboStar systems are delivered ready to use, including the first set of modules and filters.
Technical specifications
Ultrapure water specifications:
Dispense rate: 1.5 l/min
Conductivity at 25ºC: 0.055 µS/cm
Resistivity at 25ºC: 18.2 MOhm-cm
TOC: 1 - 5 ppb
Bacteria**: < 0,1 CFU/ml
Endotoxins**: < 0.001 EU/ml
Particulates >0.2 µm/ml: < 1
**with charged sterile filter
Feed water specifications:
Pressure: 0 bar
Conductivity: < 20 µS/cm
Colloid index (SDI): < 3
Free Chlorine: < 0.1 mg/l
Total Iron: < 0.1 mg/l
CO2: < 15 mg/l
SiO2: 2 ppm
Temperature: 5 - 30ºC
Mains input: 100-240 V, 50-60 Hz
Power consumption: max. 270 W
Water connection:
1/2" or 3/4" female thread
Power lead with plug (D;GB;USA):
1.5 m / 1.7 m
Dimensions and Weight
Height: 535 mm
Width: 400 mm
Depth: 520 mm
Dispatch weight: 24 kg
| Description | value |
|---|---|
| Product type description: | LaboStar PRO |
| Reg. Trademark: | Evoqua® |
| Product water conductivity: | 0,055 µS/cm |
| Output: | 1,5 l/h |
| Feed water conductivity: | 20 µS/cm |
| Total organic compounds: | 1-5 ppb |
| TOC Monitor: | Yes |
| Ultra Filtration Unit: | Yes |
| Voltage supply: | 110 V AC |
| Voltage supply: | 240 V AC |
| Width: | 400 mm |
| Depth: | 520 mm |
| Height: | 535 mm |
| Water Purification Technology: | Ultrafiltration |
| UV-irradiation device present: | Yes |
| AC power plug: | Schuko (type F) |
| Description | value |
|---|---|
| WEEE obligation: | Yes |
| WEEE registration number: | DE 91825945 |
| WEEE type of equipment: | Large equipment for use in other than private households only |
Module set Polisher - Save 15% Module Set Polisher:
1 x W3T197621 Pretreatment module DTO
1 x...
Deionizsation module VMD VMD deionizsation module for inorganic applications and for protecting...
